Description
The iPad Mini 1, 2 and 3 are catered for by this RAM Mounts kit, which supplies a high strength composite holder together with a base, standard arm and round connecting plate. The tablet must be used without a case, skin or sleeve.
A roller design allows smooth placement and removal of the iPad, and the ports remain accessible.
Key features
- High strength composite holder (RAM-HOL-AP14)
- Easy access to electronic ports
- Roller design for smooth placement and removal of the iPad
- Holder can be swapped later and used with the existing base kit
- Standard double socket arm with a spring-loaded adjustment knob and ball-and-socket joints for almost infinite adjustment and a good viewing angle
- Lifetime warranty
Specifications
| Fits | Apple iPad Mini 1, 2 and 3, without case, skin or sleeve |
|---|---|
| Material | High strength composite |
| Arm | Standard double socket arm, 94mm overall length, 76mm socket-to-socket |
What’s included
- Holder, supplied with nyloc nuts and bolts for connecting to the base kit
- Round connecting plate
- Standard double socket arm
- Your choice of base (see Options)
Options
Pick the base from the Type drop-down list; each one comes with a standard arm and round plate.
- RAM-B-166-202 Suction cup, arm & round (KIT): twist-lock heavy-duty suction cup base with a 3.25″ suction cup and 1″ ball.
- RAM-B-149Z-202 U-bolt, arm & round (KIT): U-bolt base for bars or rails 13mm to 32mm in diameter.
- RAP-B-397-1-202 Small clamp, arm & round (KIT): small Tough-Clamp base: clamps flat surfaces and square rails up to 25mm thick, or round rails from 6.35mm to 19mm OD.
- RAP-B-400-202 Small claw, arm & round (KIT): small Tough-Claw base: tool-less fitting on round and square bars and rails from 16mm to 38mm outer diameter, suited to aircraft yokes.
- RAM-B-121-202 Yoke, arm & round (KIT): yoke clamp base: fits rails from 0.625″ to 1.25″ in diameter, with the 1″ ball sitting parallel to the rail.
- RAP-B-397-2-202 Medium clamp, arm & round (KIT): medium Tough-Clamp base: clamps flat surfaces and square rails up to 44.45mm thick, or round rails from 19mm to 28.5mm OD.
- RAM-B-127B-202 Windshield mounting base, arm & round (KIT): clamp base for the lip or edge of a flat surface up to 1.12″ thick, such as a car side window edge or an aircraft glare shield.
Important information
- Not suitable for an iPad Mini in a case. The X-Grip II or Tab-Tite holders are recommended for an iPad Mini in a case.
- The holder may not support your iPad if it has a screen protector.
- It is the sole responsibility of the user to comply with current legislation when mounting these products in vehicles.










