Home / Aircraft & Airfield / 3 PIN NATO AN2551 – Standard Plug

Aircraft & Airfield

£64.50 inc VAT

3 PIN NATO AN2551 – Standard Plug

Aero-Pac 3 pin NATO AN2551 standard plug: a red polycarbonate 28 VDC external power female plug for aircraft and helicopters, made in Belgium.

Description

The 3 PIN NATO AN2551 Standard Plug from Aero-Pac is a 28 VDC external power female plug for aircraft and helicopters. It is moulded in strong polycarbonate with silver-plated sleeves and a solenoid pin, and mates with the AN2552-3A external power receptacle.

Performance and dimensions follow ISO 461 (BS4G173:1985), the appropriate MOD (Air) requirements and Mil-C-7974. It is made in Belgium and supplied in red as standard, with other colours available on request.

Key features

  • Polycarbonate body, resistant to higher temperature, voltage and amperage
  • Silver-plated sleeves, with solenoid pin
  • Corrosion-proof construction
  • Registered plug design
  • Standard colour red; other colours on request
  • Mates with the AN2552-3A external power receptacle

Specifications

Type 3 pole 28 VDC external power female plug (NATO AN2551)
Standards ISO 461 (BS4G173:1985), Mil-C-7974, appropriate MOD (Air)
Material Polycarbonate, hardness 13800 psi
Weight 0.7 kg
Maximum cable 0 AWG (53 mm²)
Recommended cable 25 mm² or 2 AWG
Glass transition temperature About 147 °C (297 °F)
Tensile strength 55 to 75 MPa
Resistance change Average below 2 µΩ after 100 dry cycles
Current Maximum 1600 A, based on the resistance giving less than 0.1 V drop per contact
Abrasion resistance ASTM D1044, 10 to 15 mg per 1000 cycles
Dielectric constant 2.9 at 1 MHz

Why the third pin is shorter

Two larger pins carry the DC power and ground for the main high-current circuit. The shorter third pin powers a low-current circuit that energises a solenoid, closing the main circuit only after the longer pins are partly inserted. It uses the aircraft’s common ground, so it needs one pin only, and its limit is 100 W.

  • Removes ignition sources such as sparks when connecting or disconnecting
  • Connection is made before power is supplied, and power is removed before the main pins clear the receptacle
  • The connectors are not powered at all times, and the solenoid pin can control power management
  • Provides polarity protection and increases connector reliability

All three pins are silver plated to avoid arcing. Pictures and data are non-binding and may be changed by the manufacturer without notice.

Downloads

More information

You may also need

Additional information

Weight 0.3 kg
0
YOUR CART
  • No products in the cart.