Description
This RAM Mounts holder is made for a list of handheld devices, covering Dell Axim, HP iPAQ, Palm and Toshiba models shown below. It grips devices that fit within the stated clamping dimensions.
The kit comes with a standard double socket arm, a diamond connecting plate and the base of your choice.
Key features
- High strength composite holder
- Clamping range: height 4.75″ to 6.25″, width 2.25″ to 3.25″
- Includes two nuts and bolts to connect to compatible RAM components
- Standard double socket arm with a spring-loaded adjustment knob and ball-and-socket joints for almost infinite adjustment and a good viewing angle
Specifications
| Clamping height | 4.75″ to 6.25″ |
|---|---|
| Clamping width | 2.25″ to 3.25″ |
| Material | High strength composite |
| Dell | Axim X3, X30, X50, X50V, X51, X51V |
| HP iPAQ | 200, 210, 211, 212, 214; H6300, H6315, H6320, H6325, HW6510, HW6515, HX2000, HX2100, HX2110, HX2400, HX2415, HX2490, HX2700, HX2715, HX2750, HX2755, HX2775, HX4700, HX4705, RX3115, RX3715, RX5915, RX5935, RZ1700, RZ1710 |
| Palm | III, M100, M105, M125, M130, M500, M505, M515, T/X, Tungsten, V, VX, Zire, Zire 21 |
| Toshiba | E300, E310, E330, E350, E355, E740, E750, E755, E800 |
| Arm | Standard double socket arm, 94mm overall length, 76mm socket-to-socket |
What’s included
- Holder with two nuts and bolts
- Diamond connecting plate
- Standard double socket arm
- Your choice of base (see Options)
Options
Choose the base from the Type drop-down list. Each option is a base with a standard arm and diamond plate.
- RAM-B-166 Suction cup, arm & diamond (KIT): twist-lock suction cup base with a 3.25″ suction cup and diamond plate end, for attaching to a vehicle windscreen.
- RAM-B-149Z U-bolt, arm & diamond (KIT): U-bolt base for handlebars, tubing or railing; hardware accommodates rails from 0.5″ to 1.25″ in diameter.
- RAP-B-397-1-238 Small clamp, arm & diamond (KIT): small Tough-Clamp base with a 1″ ball and a diamond base adapter with the universal AMPS hole pattern.
- RAP-B-400-238 Small claw, arm & diamond (KIT): small Tough-Claw base: tool-less fitting on round, square and odd-shaped rails and bars from 0.625″ to 1.5″ outer diameter.
- RAM-B-121-238 Yoke, arm & diamond (KIT): yoke clamp base: fits rails from 0.625″ to 1.25″ in diameter, with the 1″ ball sitting parallel to the rail.
- RAP-B-397-2-238 Medium clamp, arm & diamond, arm & diamond (KIT): medium Tough-Clamp base: flat surfaces and square rails from 0″ to 1.75″ thick, or round rails from 0.75″ to 1.125″ OD.
- RAM-B-127B Windshield mounting base, arm & diamond (KIT): clamp base for the lip or edge of a flat surface up to 1.12″ thick, such as a car side window edge or an aircraft glare shield.
Important information
- Check your device against the compatibility list and clamping dimensions before ordering.










