Home / Aircraft & Airfield / Complete Kit with Holder for the Apple iPad Pro 1& iPad Pro 2, Size: 12.9″

Aircraft & Airfield

£82.98 inc VAT

Complete Kit with Holder for the Apple iPad Pro 1& iPad Pro 2, Size: 12.9″

Clear selection
SKU: RAM-HOL-AP21KIT Categories: , ,

Description

The RAM® Mounts EZ-Roll’r™ for the iPad Pro secures your device in a form-fit holder that keeps the entire screen visible.

Designed for tablets that are not in a case, the EZ-Roll’r for the iPad Pro features a holder for the Apple Pencil as well. Simply slide the tablet into the bottom cups and then roll the top clip over the top of the device to anchor it. Side buttons, charging port and camera lens are conveniently exposed and accessible while in the EZ-Roll’r™ holder.

Included is a set of four nuts and bolts to connect to any suitable RAM components, or mounts that contain the universal AMPs hole pattern.

Compatible with 1st and 2nd Gen iPad Pro 12.9 models only!

Features:
1. Compatible with various iPad cable/docking accessories
2. Patented roller design for super smooth placement and removal of the iPad Pro
3. High strength materials maximise longevity of holder
4. Full access to all ports
5. Holder for Apple Pencil built into the side
6. Lifetime warranty
7. Made in U.S.A.

Material:High Strength Composite

Note: This product is NOT recommended for devices with a Tech Armor Glass Screen Protector.

ACCESSORY: Round connecting plate.

ARM: The standard double socket arm, has a socket at both ends that accommodates connecting balls. A spring loaded adjustment knob opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles. Dimensions: overall length: 94mm. Socket-to-socket length: 76mm

Base Choices (SELECT YOUR PREFERENCE FROM THE DROP DOWN LIST BELOW):

  1. RAM-B-166-202 Twist lock heavy duty suction cup with round plate connector accessory. The RAM twist lock suction cup mount consists of a 3.25″ suction cup locking base with a 1″ ball attached, a double socket arm and a round plate with drilled hoes including the universal AMPS hole pattern. RAM’s patented design dampens shock and vibration helping to extend the life of mobile electronic devices while the rubber ball and socket technology allows for almost infinite adjustment.
  2. RAM-B-149ZA-202 U-bolt to fit bar or rail 13mm to 32mm diameter (RAM-B-202 + RAM-B-201-A + RAM-B-231Z)
  3. RAP-B-397-1-202 Small Tough-Clamp base (RAP-B-397-1) + Standard Arm (RAM-B-201) + Round Plate (RAM-B-202). The RAM Tough-Clamp™ includes a 1″ ball which can be used to mount a variety of products utilising RAM’s vast selection of mounting solutions. Attach your GoPro camera, Smartphone, RAM AQUA BOX® Pro or similar light weight device on almost any flat surface, square and round rail. Clamping Dimensions: 1. Flat surfaces and square rails up to 25mm thick. 2. Round rails from 6.35mm to 19mm OD. 
  4. RAP-B-400-202 Small Tough-Claw (RAP-B-400) + Standard Arm (RAM-B-201) + Round Plate (RAM-B-202). The RAM® Tough-Claw™ is the perfect mounting base for quick and easy tool-less installation and removal on round and square bars and rails. The Tough-Claw™ can be clamped on rails from 16mm to 38mm outer diameter. Ideal for mounting tablets, action cameras, smartphones, rod holders for rod storage and much more in a wide variety of applications. Perfectly suited for mounting on the yoke of an aircraft, handlebars and seat posts of bicycles, kayak rails, roll bars and much more.
  5. RAM-B-121-202 Yoke clamp base + standard arm + round plate. The yoke clamp base will fit rails in diameter from 0.625″ to a maximum of 1.25″. The 1″ rubber ball is at a right angle to the plane of the mount; when connected to a rail, the ball sits parallel to the rail.
  6. RAP-B-397-2-202 Medium Tough-Clamp (RAP-B-397-2) + standard arm (RAM-B-201) + round plate (RAM-B-202). The RAM Tough-Clamp™ includes a 1″ ball which can be used to mount a variety of products utilising RAM’s vast selection of mounting solutions. Attach your GoPro camera, Smartphone, RAM AQUA BOX® Pro or similar light weight device on almost any flat surface, square and round rail. Clamping Dimensions: 1. Flat surfaces and square rails up to 44.45mm thick. 2. Round rails from 19mm to 28.5mm OD.
  7. RAM-B-127B This clamp base is designed to mount to the lip/edge of a flat surface up to 1.12″ thick. Popular mounting edges include a car side window edge lip or glare shield on an airplane. The base has two composite bolts that, when tightened, clamp the base to the lip surface. A RAM 1″ diameter rubber ball is connected to the base allowing you to connect a RAM 1″ diameter arm socket and connection plates to create the perfect mount for your application.

     

    Please note: This holder may not support your tablet if it has a screen protector.

Additional information

Options

1. RAM-B-166-202 Suction cup, arm & round KIT, 2. RAM-B-149Z-202 U-bolt, 3. RAP-B-397-1-202 Small clamp, 4. RAP-B-400-202 Small claw, 5. RAM-B-121-202 Yoke, 6. RAP-B-397-2-202 Medium clamp, 7. RAM-B-127B-202 Windshield mounting base

Reviews

There are no reviews yet.

Be the first to review “Complete Kit with Holder for the Apple iPad Pro 1& iPad Pro 2, Size: 12.9″”

Your email address will not be published. Required fields are marked *